SkyRC – MC3000 Charger



COD: 3SK1083 Categoria: Tag: , ,


Four-channel multifunction charger / discharger providing complete and very comfortable taking care of your batteries in a cylindrical housing of all common types (NiMH, NiMH – Eneloop, NiCd, NiZn, Li-ion, Li-ion4.35, LiFePO4). Smart chargers programs about your battery care, from initial formation of a small stream, through regular (fast) charging or discharging, cyclic charge / discharge, trickle charge, storage charge / discharge capacity, to testing and commissioning long run articles or vice versa a long time stored. The set includes a charger and AC adapter.

The MC3000 enables the same time – and yet independently – to charge or discharge up to four different batteries in cylindrical housings. The parameters of the ongoing process (charging / discharging current charge / discharge capacity, battery voltage) are continuously displayed for all channels on the LCD. There is also a graphical display of charge / discharge curve.

The user interface can switch between three modes menu: particularly “foolproof” Dummy (Basic) intended to be only for NiMH and Li-ion batteries, Simple (Simple) for charging all types of batteries with minimal adjustment values \u200b\u200band Advanced (Advanced) for all battery types with extensive parameter settings (terminal voltage discharge / charge termination current, completion of the process in reaching anstavené temperature, capacity, time sensitivity of delta-peak detection etc.). In the Advanced menu, you can adjust each parameter of the operating mode, while for everyday use may be more apt simpler menu requiring the setting of a small number of parameters. A key part of the user interface are numbered user programs; MC3000 has 30 editable programs. Whenever you use one of the four channels, you use one of the 30 programs. The programs are global in scope – any channel charger can assign any program in memory.

MC3000 is equipped with a USB interface (USB micro-B connector) allows firmware updates and charger mainly in the management of its activities and monitor the progress of charging / discharging with comfortable PC Link functioning Windows operating system (Windows 7 or later). The program provides a convenient parameter setting charger and a mouse click you can simultaneously monitor important values \u200b\u200bof the quantities of all four channels using graphs in real time, for example. Watch all charged and discharged capacity of the complex program with many cycles. For a more detailed analysis or subsequent processing of measured data can be exported in CSV format spreadsheet programs such as MS Excel. In addition, you will also measure the internal resistance of the battery.

The MC3000 also features Bluetooth 4.0 interface allowing monitoring during the charge / discharge control and charger using a smartphone or other mobile devices running iOS or Android.

Thanks to the USB power socket 5 V / 2,1 A MC3000 can also take care of powering and charging your mobile devices.

For the advanced amateur or professional users is available and user calibration voltages and currents.

Operating charger and use your batteries will help you detailed instructions describing the principles of proper charging and battery operation.

Basic functions

  • The input supply voltage of 100-240 V / 50-60 Hz power supply
  • The input supply voltage of 11-18 V DC Power consumption max. 60 W
  • For charging and discharging up to four cells in cylindrical housing NiMH, NiCd, NiZn, Eneloop NiMH, Lithium-Ion, LiIo4.35, LiFePO4 and Li-Mn (using Li-ion program).
  • Applicable for battery sizes: AAAA, AAA, AA, Sub-C, C, 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16340, RCR123, 16500 , 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650 (up to 4 articles of this size) or D, 32600, 32650 (max. Two articles of this size + two smaller ones).
  • Adjustable charging current of 0.05 A – 3.00 A
  • Adjustable discharge current of 0.05 A – 2.00 A
  • Max. power to charge 50 W.
  • Max. performance for discharging 15 W.
  • Operating modes: Charge (Charging) Discharge (Discharge), Storage (Storage), Cycle (cycling), Refresh (Revival), Break_in (Formation).
  • End charging by regulators delta-peak for NiCd and NiMH, charging by constant current / constant voltage for NiZn, Li-ion, LiFePO4, Li-ion4.35V.
  • Adjustable terminal voltage for charging and discharging.
  • Adjustable sensitivity of delta-peak detection 1-20 mV.
  • Repeated cycle operation of charging / discharging or discharging / recharging (1-99 cycles).
  • Completion of charging or discharging at a limiting temperature of 20-70 ° C (when operating a smartphone).
  • Completion of charging or discharging when exceeding max. Capacity (000 mAh 100-50).
  • Fully charged or discharged in violation of the set time (0-1440 minutes).
  • Formation battery (charging and discharging low current).
  • Trickle charging 0.01-0.05 A.
  • Parameter settings and navigate through the menus using the buttons on the charger to a PC via a USB interface pprogramu Link PC or smartphone (iOS or Android) via Bluetooth 4.0 interface.
  • USB power socket 5 V / 2.1 A for powering / charging smartphones, tablets, digital camera’s etc.
  • Backlit LCD display 128×64 pixels with simple and clear menu and display parameters during charging.
  • Forced cooling fan with intelligent controls.
  • The compact, rigid plastic box with folding armrest.
  • AC Adapter 12 V / 60 W.

Charger kit includes: MC3000, power supply 12 V / 60 W, instructions.

Input voltage (AC – AC) [In]100-240
Input voltage (car battery – DC) [V]11-18
Charging current [A]0.0 5-3
Discharge current [A]0.05 – 2
Number of channels4
Li-Ion [Art.]1
Li-Fe [Art.]1
Li-Ion 4.35V [Art.]1
NiCd [Art.]1
NiMH [Art.]1
NiZn [Art.]1
Charging performance overall [W]50
Performance when discharging the total [W]15
Output voltage USB output [V]5
Output current USB output [A]2.1
Length [mm]200
Width [mm]124
Height [mm]69
Weight [g]600